understanding results kiln usage

[rondoc]

I have downloaded my kiln data and get results but do not understand what  I should try first. my # is /FOWZE3bZxh. It looks like P -0.1, I 44, D 11033. should I try these. I have never used a – for a P entry.

The challenge is to avoid excessive overshoot at the start of a firing schedule.

thank you .

ronald

 

[pidtuner]

Hi, thank you for using pidtuner.

Looking at your test data, it seems that the step response test has not been done properly. Please look at the following guidelines to make a proper step response:

https://github.com/pidtuner/pidtuner.github.io/blob/master/assets/doc/PID%20Tuner.pdf

[Author]

Posts